
1. Press
, and then press settings.
2. Press time and date settings, and then set time and date. 3. Press
or
to adjust the value. 4. Press
.
Peugeot 208. Operation
Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when yo ...
Fiat Punto. Starting procedure for petrol
versions
Proceed as follows:
Ensure that the handbrake is up;
Put the gear lever into neutral;
Press the clutch pedal down to the floor without
touching the accelerator;
Turn the ignition key to AV ...
Nissan Micra. Vehicle loading information
WARNING
It is extremely dangerous to ride
in a cargo area inside a vehicle. In
a collision, people riding in these
areas are more likely to be seriously
injured or killed.
...